Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 97

4 Control Units
4.2 "SIMODRIVE 611 universal HRS" control board
Optional
PROFIBUS DP
module
X423
Two–color LED
for diagnostics
Fig. 4-7 Optional PROFIBUS DP module
Table 4-8 Which optional modules are available?
Designation Order No. (MLFB)
PROFIBUS DP2 6SN1114–0NB00–0AA2
Features that
PROFIBUS DP2 and DP3 have in common
PROFIBUS DP3 6SN1114–0NB01–0AA1
4-96
The "SIMODRIVE 611 universal" control board can be connected and operated
as DP slave on the PROFIBUS DP fieldbus when this optional module is used.
S
PROFIBUS ASIC DPC31 without PLL
S
For control boards as of SW 3.1, this module can replace the
optional PROFIBUS DP1 module
S
Requirement:
Control board as of SW 3.1 is required
S
Cyclic data transfer (PKW and PZD section) possible
S
FW module can be updated using SimoCom U
S
Non–cyclic data transfer (DP/V1)
S
"SimoCom U via PROFIBUS" possible
S
PROFIBUS ASIC DPC31 with PLL
S
"Motion Control with PROFIBUS DP" function (clock–synchro-
nous PROFIBUS operation) is possible
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
For screws:
Tighten (due to the shield contact)
max. torque = 0.8 Nm
Properties
© Siemens AG 2012 All Rights Reserved
11.05
05.01