Mounting - Siemens 6SN1123-1AA00-0DA2 Configuration Manual

02.12
05.01
8.16.3

Mounting

The Voltage Protection Module is mounted in the cabinet close to the drive.
Danger
!
It is only permissible to connect motor reactors between the Voltage Protection
Module and the motor.
Fig. 8-47
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
From the power module
1) Hole size for the mounting plate, screw mounting with 4 x M5
2) Mounting clearance for routing cables, dependent on the cable type
Mounting dimensions for a Voltage Protection Module VPM120
8 Important Circuit Information
8.16 VPM Voltage Protection Module
1)
125 (4.92)
From the motor
8
8-333