Checking The Permissible Power Supply Rating - Siemens 6SN1123-1AA00-0DA2 Configuration Manual

02.12
05.01
1.3.5

Checking the permissible power supply rating

The infeed or monitoring module used offers a basic equipping of the electronic
(EP values) and control power supply (AP values).
The following table is used to determine the power supply requirement of a drive
line–up.
The number of modules used should be entered. The product from "Evaluation
factor individual module" and "Number of modules" should be formed.
An (additional) monitoring module must be provided if one of these values is
exceeded. The following tables should be used again for the module line–up,
supplied from the monitoring module.
The monitoring module must be located to the left in front of the modules to be
monitored.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
1 Overview of the Drive System
1.3 Engineering a drive
1
1-37