Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 262

02.03
05.01
Table 8-2
Protective door A
Protective door B
X = the drives are shutdown when the protective device is actuated
Behavior when the
As long as the assigned protective device prevents any intervention in the haz-
protective doors ardous zone, the feedback signal contacts of these power modules are jump-
ered. After the protective device has been opened, the drives must be shut-
are open
down in the defined time and the feedback signal contacts of the safety relay
must be closed – otherwise, the higher–level main contactor will open.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
8.5 Start inhibit in the drive modules/safe standstill
Effect of the moving protective devices on the drive groups
Moving protective Drive 1.1/1.2/1.3
device
1
X
–
8 Important Circuit Information
Drive 2.1/2.2 Drive 3.1
2 3
X _
X X
8
8-261