Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 7

Forword
1.2 Systemkonfiguration 1
FAQs
Target group
Technical Support
Certificates
vi
You can find Frequently Asked Questions in the Service&Support pages under
Product Support:
http//support.automation.siemens.com
This documentation addresses machine manufacturing companies (OEMs) that
wish to configure, construct and commission a drive line–up based on
SIMODRIVE components.
Local country telephone numbers for technical support are provided in the Inter-
net under Contact:
http://www.siemens.com automation/service&support
You will find the certificates for the products described in this documentation in
the Internet: http://www.support.automation.siemens.com
under the Product/Order No. 15257461
or contact the relevant branch office of the A&D MC group of Siemens AG.
All declarations of conformity and certificates such as CE, UL, etc., are per-
formed with the system components described in the associated Configuration
Manuals or catalogs and, thus, are only valid if the described components are
used in the device or facility.
Note
The use of components not released by Siemens may require the user to
prepare new certificates/declarations of conformity.
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
© Siemens AG 2012 All Rights Reserved
02.12
05.01