RadioLink AT9S PRO Manual page 20

original model name. Accordingly, if you want to change the model type, the whole data need to reset, also for
model name. The first thing to copy is to change the model type or delete the original name and rename a
new model to avoid confusion.
Model Name
This is used to set the present model name. Name all model to identify each other, and fast select the
model type and reduce possible crash by wrong model type using.
Format to name a model:
•the name can be more than 9 characters
•every character can be letter, number, blank or special characters
•factory setting name MODEL-XXXX will be shown as (example model 1 display MODEL-0001)
Goals
Name
model3"Cap-
232_"(where
underline
represents a
blank space
Sub-menu select: All parameters need one time setting. After the model type selected, you need to set the
related data for it.
•what is the model type
•whether the throttle channel 3 is right for the selected model type? Or you need to make sure channel 3 is of
full range adjustable (glider only). Also to different model, you can set by throttle reverse correspondingly.
Initialize the original data first, and set new data for the selected model type
Model reset: model reset is available in factory only. If you want to delete a new set model type, you need to
delete one by one.
Goals
Confirm you're currently using the
proper model memory(Ex:1)
Open PARAMETER submenu
Reset model
memory 1
Reset the memory
Confirm the change
Close
Steps
Open Model
Confirm correct model (Ex:3)
Go to Name to change the
first character(Ex: M to C)
Change the next character
Repeat the prior steps until
finish naming model.
Close
Steps
Inputs
for 1second.(If ADVANCE,
to MODEL SEL. Press PUSH
If select doesn't show '3',perform Model
select
M to C, press PUSH.
to choose character, press PUSH to
confirm
to a .Repeat.
Inputs
On home screen, check model name and No.
on top left, if not correct use Model Select.
For 1second
Push, to Model 1,PUSH
Are you sure? Press PUSH
15
Radiolink Electronic Ltd
www.radiolink.com
again)
to Model SEL, Push.