Configuration Example - Extreme Networks Summit Summit1 Installation And User Manual

IP U R
NICAST OUTING
Table 9-4: ICMP Configuration Commands (continued)
Command
disable irdp {vlan <name> | all}
R C
OUTING ONFIGURATION
Figure 9-2 illustrates a Switch that has three VLANs deÞned as follows:
¥ Finance
Ñ Protocol-sensitive VLAN using the IP protocol
Ñ Ports 1 and 3 have been assigned
Ñ IP address 192.207.35.1
¥ Personnel
Ñ Protocol-sensitive VLAN using the IP protocol
Ñ Ports 2 and 4 have been assigned
Ñ IP address 192.207.36.1
¥ MyCompany
Ñ Port-based VLAN
Ñ All ports have been assigned
The stations connected to ports 1 through 4 generate a combination of IP trafÞc and
NetBIOS trafÞc. The IP trafÞc is Þltered by the protocol-sensitive VLANs. All other
trafÞc is directed to the VLAN MyCompany.
9-10
Description
Disables the generation of router
advertisement messages on one or more
VLANs.
E
XAMPLE
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE