Reset, Upgrade or Downgrade Software
Figure 33: Reset Button for the ISW 8GbP, 4-SFP+ Switch
Figure 34: Reset Button for the ISW 24GbP, 4-SFP Switch
Reset Configuration Defaults via CLI Command
If you want to reset the configuration to default, but keep management IP settings, do
the following:
1. Execute the command: reload defaults keep-ip
2. Check interface and IP address, and confirm only management IP setting is kept.
3. Execute the command: copy running-config startup-config
If you want to reset all configurations to the default:
ISW Series Managed Industrial Ethernet Switch Hardware Installation Guide
Reset Configuration Defaults via CLI Command
57