Overview Of Ip Unicast Routing; Router Interfaces - Extreme Networks Summit Summit1 Installation And User Manual

9 IP Unicast Routing
The chapter describes how to conÞgure IP routing on the Summit. It assumes that
you are already familiar with IP unicast routing. If not, refer to the following
publications for additional information:
RFC 1058 Ñ Routing Information Protocol
RFC 1256 Ñ ICMP Router Discovery Messages
RFC 1723 Ñ RIP Version 2
RFC 1812 Ñ Requirements for IP Version 4 Routers
O
VERVIEW OF
The Summit provides full Layer 3, IP unicast routing. It exchanges routing information
with other routers on the network using the Routing Information Protocol (RIP). The
Summit dynamically builds and maintains a routing table, and determines the best path
for each of its routes.
Each host using the IP unicast routing functionality of the Summit must have a unique
IP address assigned. In addition, the default gateway assigned to the host must be the
IP address of the Summit router interface.
R
OUTER
The routing software and hardware routes IP trafÞc between router interfaces. A router
interface is simply a VLAN that has an IP address assigned to it.
S S I
UMMIT WITCH NSTALLATION AND
IP U
NICAST
I
NTERFACES
U G
SER UIDE
R
OUTING
9-1