C
OMMANDS
L
C
OGGING
OMMANDS
Table 4-18
describes Switch logging commands.
Table 4-18: Logging Commands
Command
show log config
show log {<priority>} {<subsystem>}
clear log
config log display {<priority>} {<subsystem>}
4-26
Description
Displays the log configuration, including the
syslog host IP address, the priority level of
messages being logged locally, and the
priority level of messages being sent to the
syslog host.
Displays the current snapshot of the log.
Options include:
priority — Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
subsystem — Filters the log to display
messages associated with the selected
Switch subsystem. Subsystems include
Syst, STP, Brdg, SNMP, Telnet, VLAN,
and Port. If not specified, all subsystems
are displayed.
Clears the log.
Configures the real-time log display. Options
include:
priority — Filters the log to display
messages with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
subsystem — Filters the log to display
messages associated with the selected
Switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
displayed.
S
S
I
UMMIT
WITCH
NSTALLATION AND
U
G
SER
UIDE