Extreme Networks Summit Summit1 Installation And User Manual page 124

S M S
TATUS ONITORING AND TATISTICS
Table 10-1: Switch Monitoring Commands (continued)
Command
show fdb {all | <macaddress> | vlan
<name> | <portlist> | permanent}
show ip config {vlan <name> | all}
show iparp {<ip_address> | vlan
<name> | all | permanent}
show ipfdb {<ipaddress> | vlan <name>
| all}
show ipmcroute {vlan <name> | all |
permanent}
show iproute vlan {<name> | all |
permanent}
show ipstats {vlan [<name> | all]}
10-2
Description
Displays the forwarding database contents including
MAC address, associated VLAN, port, age-of-entry
configuration method, and status. Providing one of
the options acts as a filter on the display. Providing a
VLAN name displays all entries for the VLAN. Use
the MAC address to locate a specific entry in the
FDB.
Displays configuration information for one or more
VLANs, including the following:
IP address, subnet mask
IP forwarding information
BOOTP configuration
VLAN name, VLANid
Global ICMP configuration
Global IGMP configuration
Global IRDP configuration
Displays the current Address Resolution Protocol
(ARP) cache for a selected IP address, VLAN, or all
entries. With no options, information for all VLANs is
displayed.
Information displayed includes IP address, MAC
address, aging timer value, VLAN name, VLANid, and
port number.
Displays the contents of the IP forwarding database
table. Use for technical support purposes.
Displays the contents of the IP multicast route table.
Displays the contents of the IP routing table.
Displays statistics of packets handled by the CPU,
including the following:
inpackets, outpackets
ICMP/IGMP statistics
IRDP statistics
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE