Extreme Networks Summit Summit1 Installation And User Manual page 66

C
OMMANDS
ICMP C
OMMANDS
Table 4-16 describes the commands used to conÞgure the ICMP protocol.
Table 4-16: ICMP Commands
Command
enable icmp redirects {vlan <name> | all}
disable icmp redirects {vlan <name> | all}
enable icmp unreachables {vlan <name> | all}
disable icmp unreachables
enable icmp useredirects
disable icmp useredirects
enable irdp {vlan <name> | all}
disable irdp {vlan <name> | all}
config irdp [multicast | broadcast]
4-22
Description
Enables generation of ICMP redirect messages
on one or more VLANs. The default setting is
enabled.
Disables the generation of ICMP redirects on
one or more VLANs.
Enables the generation of ICMP unreachable
messages on one or more VLANs. The default
setting is enabled.
Disables the generation of ICMP unreachable
messages on one or more VLANs.
Enables the modification of route table
information when an ICMP redirect message
is received. The default setting is disabled.
Disables the changing of routing table
information when an ICMP redirect message
is received.
Enables the generation of ICMP router
advertisement messages on one or more
VLANs. The default setting is enabled.
Disables the generation of router
advertisement messages on one or more
VLANs.
Configures the destination address of the
router advertisement messages. The default
setting is broadcast.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE