Extreme Networks Summit Summit1 Installation And User Manual page 122

IP U R
NICAST OUTING
Table 9-6: Router Reset and Disable Commands (continued)
Command
disable icmp redirects {vlan <name> | all}
disable icmp unreachables
disable icmp useredirects
disable ipforwarding {vlan <name> | all}
disable ipforwarding broadcast {vlan
<name> | all}
disable irdp {vlan <name> | all}
disable rip {vlan <name | all}
disable rip aggregation
disable rip splithorizon
disable rip poisonreverse
disable rip triggerupdate
disable rip exportstatic
unconfig icmp
unconfig irdp
unconfig rip {vlan <name> | all}
9-14
Description
Disables the generation of ICMP redirects on one
or more VLANs.
Disables the generation of ICMP unreachable
messages on one or more VLANs.
Disables the changing of routing table information
when an ICMP redirect message is received.
Disables routing for one or more VLANs.
Disables routing of broadcasts to other networks.
Disables the generation of router advertisement
messages on one or more VLANs.
Disables RIP for one or more VLANs. When RIP
is disabled, the parameters are not reset to their
defaults, and the states are not cleared.
Disables RIP for a VLAN causes all routes
learned from that VLAN to be advertised with a
GarbageTime metric of 16, before being deleted
from the route table.
Disables the RIP aggregation of subnet
information on a RIP version 2 interface.
Disables split horizon.
Disables poison reverse.
Disables triggered updates.
Disables the filtering of static routes.
Resets all ICMP settings to the default values.
Resets all router advertisement settings to the
default values.
Resets all RIP parameters to the default VLAN.
Does not change the enable/disable state of the
RIP settings.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE