Switch Commands - Extreme Networks Summit Summit1 Installation And User Manual

C
OMMANDS
G S
ENERAL WITCH
Table 4-4 describes general Switch commands.
Table 4-4: General Switch Commands
Command
show switch
show version
show memory
reboot {<time>}
config time <time>
4-8
C
OMMANDS
Description
Displays the current Switch information,
including:
Displays the hardware and software versions
currently running on the Switch. Also displays
the Switch serial number.
Displays the current system memory
information.
Reboots the Switch at the time specified. If no
time is specified, the Switch reboots
immediately following the command.
Configures the system date and time. The
format for <time> is:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format.
sysName, sysLocation, sysContact
MAC address
Current date and time, and system uptime
Operating environment (temperature, fans,
and power supply status)
Nonvolatile Random Access Memory
(NVRAM) image information
(primary/secondary image, date, time, size,
version)
NVRAM configuration information
(primary/secondary configuration, date,
time, size, version)
Scheduled reboot information
System serial number and reworks indicator
Software platform
System ID
Power supply and fan status
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE