Extreme Networks Summit Summit1 Installation And User Manual page 64

C
OMMANDS
Table 4-13: Basic IP Commands (continued)
Command
config bootprelay add <ipaddress>
config bootprelay delete [<ipaddress> | all]
show iparp {<ipaddress> | vlan <name> | all |
permanent}
clear iparp [<ipaddress> | vlan <name> | all]
show iproute vlan {<name> | all | permanent}
config iproute add default <gateway>
{<metric>}
config iproute delete default <gateway>
IP ARP C
OMMANDS
Table 4-14 describes IP ARP commands.
Table 4-14: IP ARP Commands
Command
show iparp {<ipaddress> | vlan <name> | all |
permanent}
clear iparp [<ipaddress> | vlan <name> | all]
config iparp add <ipaddress> <mac_address>
config iparp delete <ipaddress>
show iproute vlan {<name> | all | permanent}
4-20
Description
Adds IP addresses to be used as IP
destinations to forward BOOTP packets.
Deletes one or all IP addresses that were used
as IP destinations to forward BOOTP packets.
Displays the current Address Resolution
Protocol (ARP) cache for a selected IP
address, VLAN, or all entries. With no options,
information for all VLANs is displayed.
Information displayed includes IP address,
MAC address, aging timer value, VLAN name,
VLANid, and port number.
Removes dynamic entries in the IP ARP table.
Displays the contents of the IP routing table.
Adds a default gateway. A default gateway
must be located on a configured IP interface.
Deletes a default gateway.
Description
Displays the current Address Resolution
Protocol (ARP) cache for a selected IP
address, VLAN, or all entries. With no options,
information for all VLANs is displayed.
Information displayed includes IP address,
MAC address, aging timer value, VLAN name,
VLANid, and port number.
Removes dynamic entries in the IP ARP table.
Adds a permanent IP ARP entry to the system.
The IP address is used to match the IP
interface address to locate a suitable interface.
Removes an IP ARP entry from the table.
Displays the contents of the IP routing table.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE