Extreme Networks Summit Summit1 Installation And User Manual page 134

S M S
TATUS ONITORING AND TATISTICS
Table 10-4: Logging Commands (continued)
Command
disable log display
disable syslog
show log {<priority>} {<subsystem>}
show log config
clear counters
clear log
RMON
Using the Remote Monitoring (RMON) capabilities of the Switch allows network
administrators to improve Switch efÞciency and reduce the load on the network.
The following sections explain more about the RMON concept and the RMON features
supported by the Summit.
You can only use the RMON features of the Switch if you have an RMON
management application.
10-12
Description
Disables the log display.
Disables logging to a remote syslog host.
Displays the current snapshot of the log.
Options include:
priority — Filters the log to display
message with the selected priority or
higher (more critical). Priorities include
critical, warning, and informational. If not
specified, informational priority messages
and higher are displayed.
subsystem — Filters the log to display
messages associated with the selected
Switch subsystem. Subsystems include
Syst, STP Brdg, SNMP, Telnet, VLAN, and
Port. If not specified, all subsystems are
displayed.
Allow you to display the log configuration,
including the syslog host IP address, the
priority level of messages being logged locally,
and the priority level of messages being sent
to the syslog host.
Allows you to clear all statistics Switch and
port counters.
Allows you to clear the log.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE