Switch Logging - Extreme Networks Summit Summit1 Installation And User Manual

S M S
TATUS ONITORING AND TATISTICS
¥ Receive Frames Lost (RX Lost) Ñ The total number of frames received by the port
that were lost because of buffer overßow in the Switch.
S L
WITCH OGGING
The Summit log tracks all conÞguration and fault information pertaining to the device.
Each entry in the log contains the following information:
¥ Timestamp Ñ The timestamp records the month and day of the event, along with
the time (hours, minutes, and seconds) in the form HH:MM:SS. If the event was
caused by a user, the user name is also provided.
¥ Fault level Ñ Table 10-2
assign to a fault.
Table 10-2: Fault Levels Assigned by the Switch
Level Description
Critical A desired Switch function is inoperable. The Switch
may need to be reset.
Warning A noncritical error that may lead to a function failure.
Informational Actions and events that are consistent with expected
behavior.
¥ Subsystem Ñ The facility refers to the speciÞc functional area of the Switch to which
the error refers. Table 10-3
Table 10-3: Fault Log Subsystems
Subsystem Description
Syst General system-related information. Examples include
memory, power supply, security violations, fan failure,
overheat condition, and configuration mode.
STP STP information. Examples include an STP state
change.
Brdg Bridge-related functionality. Examples include low table
space and queue overflow.
SNMP SNMP information. Examples include community string
violations.
10-8
describes the three levels of importance that the Switch can
describes the subsystems.
S S I
UMMIT WITCH NSTALLATION AND
U G
SER UIDE