Extreme Networks Summit Summit1 Installation And User Manual page 57

P
ROTOCOL
Table 4-8
Table 4-8: Protocol Commands
Command
show protocol {<protocol_name> | all}
create protocol <protocol _ name>
delete protocol <protocol_name>
config protocol <protocol_name> [add |
delete] <prototype_number>
{<prototype_number>} ...
FDB C
OMMANDS
Table 4-9
Table 4-9: FDB Commands
Command
show fdb {all | <mac_address> | vlan <name> |
<portlist> | permanent}
clear fdb {all | <mac_address> | vlan <name>
| <portlist> }
S S I
UMMIT WITCH NSTALLATION AND
C
OMMANDS
describes protocol commands.
describes FDB commands.
U G
SER UIDE
Description
Displays protocol-related information, including:
Protocol name
List of protocol fields
List of VLANs that use this protocol
Creates a user-defined protocol.
Removes a protocol.
Configures a protocol filter. Supported protocol
types include:
EtherType
LLC
SNAP
Description
Displays the forwarding database contents
including MAC address, associated VLAN,
port, age-of-entry configuration method, and
status. Providing one of the options acts as a
filter on the display. Providing a VLAN name
displays all entries for the VLAN. Use the MAC
address to locate a specific entry in the FDB.
Clears dynamic FDB entries that match the
filter. Use the keyword all to clear all dynamic
entries.
S C
UMMIT OMMANDS
4-13