Connect Multiple Devices - Graco Therm-O-Flow 20 Instructions - Parts Manual

Setup

Connect Multiple Devices

If your application requires multiple fluid control
devices:
• Connect heated hose electrical connections to the
electrical enclosure. Remove from shipping box to
connect heated hoses to the electrical enclosure.
For additional cables, heated hose, and fluid
control devices, see Accessories and Kits, page
88.
F . 13
IG
18
• Connect fluid control devices to a heated hose or
the electrical enclosure. Use accessories if
necessary.
• Setup all heat zones on Heat-A and Heat-B
screens.
Example: Heated zones used to connect a primary and
secondary system to a manifold and two guns. A-#
zones are on the Heat-A screen and B-# zones are on
the Heat-B screen.
NOTE: Pump settings will not be shown on Mini-5
systems with software version 1.01.042 or later.
334129S