Screen Components - Graco Therm-O-Flow 20 Instructions - Parts Manual

Screen Components

Operating Mode
System Off
Inactive
Warm Up
Heat Soak
Ready
Active
334129S
Description
The system does not have power.
The heating system and pumps are
disabled.
The system is heating the material to the
setpoint temperature.
Heat zones are all at temperature. Material
is soaking for a user specified amount of
time.
All enabled zones are at setpoint
temperature. The Air Motor does not have
power.
The system is ready to dispense.
1. Screen Order
2. Current date and time
3. Operating Mode
4. Faults, Status
5. MZLP Plug Identifier
6. Zone Setpoint Temperature
7. Zone Actual Temperature
Component Status
• No system status indicator LED on the
ADM
• No heat
• Pump is off
• Yellow system indicator LED on the ADM
• No heat
• Pump is off
• Flashing green system status indicator
LED on the ADM
• Heat is increasing to setpoint
temperature
• Pump is off
• Flashing green system status indicator
LED on the ADM
• Heat is at setpoint
• Material is absorbing more heat
• Pump is off
• Heat soak counter counts down on the
Home screen.
• Flashing green system status indicator
LED on the ADM
• Heat is at setpoint
• Pump is off
• Solid green system status indicator LED
on the ADM
• Heat is at setpoint temperature
• Pump is on
Component Identification
13