Graco Therm-O-Flow 20 Instructions - Parts Manual page 103

Heat - A
Use these screens to set target and setback
temperatures for the Pump, Platen, and zones. Select
which system needs to use the heated accessory.
Zone Types:
• Hose
• Gun
• PGM
• Flowmeter
• Pressure Regulator
• Manifold
• Other
NOTE: To ensure accurate hose and gun temperatures,
set hose as zone 1, 3, 5, 7, 9, or 11 when connected to
MZLP and a heated hose.
NOTE: Pump settings will not be displayed on Mini-5
systems with software versions 1.04.042 or later.
334129S
Appendix A - ADM
103