Table of Contents
Advertisement
I
1-2
nstallatIon
LOCATION (CONTINUED)
Placing refrigerated merchandisers in direct
sunlight, near hot tables or near other heat
sources could impair their efficiency . Like
other merchandisers, these merchandisers
are sensitive to air disturbances . Air currents
passing around merchandisers will seriously
impair their operation .
Do NOT allow air conditioning, electric fans,
open doors or windows, etc . to create air
currents around the merchandiser . For the
equipment's proper installation, check if it is
placed on an even surface and not near sources
of heat and/or direct solar radiation or near
doors, windows, fans, and vents .
Maintain a minimum 150 mm or 5.9 inches at rear of case.
Case ventilation openings must be
clear of any obstructions. Do not
damage the refrigerant circuit.
Do NOT stand or walk on top of
merchandiser. Do not store items
or flammable materials atop the
unit.
P/N 3116321_A
Rear Ventilation Grille
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
SELF CONTAINED (LOCATION)
Product should always be maintained at
proper temperature . This means that from the
time the product is received, through storage,
preparation and display, the temperature of
the product must be controlled to maximize
the life of the product . In humid environments
with a large concentration of salt, like fish
markets, pay sure water does not come directly
into contact with the compressor area .
B
e sure to position self contained
merchandisers properly
SELF CONTAINED models have vented
base panels to allow air circulation through
the condensing unit . These panels are located
around the condensing unit .
Allow for a minimum 150 mm or 5 .9 inches of
clearance from walls, merchandisers, and any
other large objects near the merchandiser's
vented base panels at the rear of the case(s) .
The equipment must be placed in a well-
ventilated area . Blocking or restricting air
flow will adversely affect performance and may
damage the refrigeration system .
MODEL DESCRIPTION
These models are island, spot display cases .
Each self-contained model has its own
condensing unit, factory installed beneath the
display area of the case ready for operation
when electrical service is connected .
UNLOADING
Unloading from Trailer:
Lever Bar (also known as a Mule, Johnson
Bar, J-bar, Lever Dolly, or Pry Lever)
.
Advertisement
Table of Contents
