Load Limits; Stocking - Hussmann micro SC ARCH Series Installation & Operation Manual

Self-contained cold-wall bunker with lids
Table of Contents

Advertisement

s
3-6
tartup

LOAD LIMITS

Each merchandiser has a load limit decal
around the perimeter of the interior . Make
sure product is loaded below limit so that
refrigeration performance and storage
temperature is not disrupted . Shelf life of
perishables will be short if load limit is violated .
A
t no time should merchAndisers be
stocked beyond the loAd limits indicAted

STOCKING

Product should NOT be placed inside the case
until case is at proper operating temperature .
Allow merchandiser 24 hours to operate before
loading product. Verify case pulls down to
setpoint temperature.
P/N 3116321_A
/ o
pEratIon
.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
These cases come with lids . The lids are
necessary for the case to operate properly and
keep the correct temperature . They should
only be opened to place and remove products .
They must be closed immediately afterwards .
Use gloves to protect the hands when loading
frozen products . Proper rotation of product
during stocking is necessary to prevent product
loss . Always bring the oldest product to the
top and set the newest to the bottom .
The wall and floor racks should always be
installed in the case . The racks must be used
to prevent products from touching the edges
of the case thawing when the case is in defrost
mode .

Advertisement

Table of Contents
loading

Table of Contents