File Prompt - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Partitioning usba:...Done.
# Divide the USB disk on the device into three partitions and specify the size for each partition.
<Sysname> fdisk usba:
The capacity of usba: : 256M bytes
Partition 1 (32MB~224MB, 256MB, Press CTRL+C to quit or Enter to use all available
space):128
// Enter
128
Partition 2 (32MB~96MB, 128MB, Press CTRL+C to quit or Enter to use all available space):31
// Enter to set the size of the second partition to 31 MB.
31
The partition size must be greater than or equal to 32MB.
Partition 2 (32MB~96MB, 128MB, Press CTRL+C to quit or Enter to use all available
space):1000
// Enter
1000
The partition size must be less than or equal to 128MB.
Partition 2 (32MB~96MB, 128MB, Press CTRL+C to quit or Enter to use all available space):127
// Enter
127
The remaining space is less than 32MB. Please enter the size of partition 2 again.
Partition 2 (32MB~96MB, 128MB, Press CTRL+C to quit or Enter to use all available space):56
// Enter to set the size of the second partition to 56 MB.
56
Partition 3 (32MB~40MB, 72MB, Press CTRL+C to quit or Enter to use all available space):
// Press Enter to assign the remaining space to the third partition.
usba: will be divided into the following partition(s):
DeviceName
usba0:
usba1:
usba2:
All data on usba: will be lost, continue? [Y/N]:y
Partitioning usba:...Done.

file prompt

Use file prompt
Use
undo file prompt
Syntax
file prompt { alert | quiet }
undo file prompt
Default
The operation mode is
file or directory operation.
Views
System view
Predefined user roles
network-admin
to set the size of the first partition to 128 MB.
to set the size of the second partition to 1000 MB.
to set the size of the second partition to 127 MB.
Capacity
128MB
56MB
72MB
to set the operation mode for files and directories.
to restore the default.
. The system prompts for confirmation when you perform a destructive
alert
137