Oon ("Out Of Neutral") - Invacare LiNX REM400 User's Manual Supplement

LiNX® Control System
Fault Fault Possible action
icon description
Right •
magnetic •
brake fault
•
•
Module •
fault (other •
than •
remote •
module)
•
1 Configuration of the motors depending on the
wheelchair model

8.2 OON ("Out Of Neutral")

OON ("Out Of Neutral") is a safety feature that prevents
accidental driving or seating movements, when:
• The system is powering up
• After a function change
• When the system comes out of an inhibit or drive
lock-out
114
Check cables and connectors.
Check right motor (or motor
lock lever) is engaged.
Refer to the chapter "Pushing
the mobility device in
freewheel mode" in the user
manual of your wheelchair.
Contact your provider.
Check cables and connectors.
Check modules.
Recharge batteries.
If the chair was stalled, reverse
away or remove obstacle.
Contact your provider.
Drive OON warning
The joystick must be in the center position:
• When a system is powering up
• On a function change
• When transitioning from a drive lock-out or inhibit state
Otherwise a drive OON warning is displayed by an overlay.
During a drive OON warning, the OON overlay is displayed
and the wheelchair does not drive. If the joystick is returned
to the center position, the warning clears and the wheelchair
drives normally.
60101834-C