Using The Extremity Control Joystick - Invacare LiNX REM400 User's Manual Supplement

All components mentioned below describe the usage
of the default set-up. For individual set-up, contact
your provider.
6.18.1 Using the Extremity Control Joystick (Chin control)
Powered adjustable
This proportional joystick needs less force to be deflected
than a standard joystick.
Driving
1. Deflect drive joystick A from neutral position to drive
in desired direction.
For more information about driving, refer to 6.5 Proportional
driving mode, page 43.
You can use wing bolt B to adjust the joystick to
your needs.
60101834-C
Changing function screens
By default an egg switch, used for function or profile
changes, is mounted to the headrest.
For difference between function screen and profile,
refer to chapter 4.2.3 User function screen overview,
page 17.
1. Short press egg switch to change function screen.
2. Long press egg switch to change profile.
For operating the powered seating functions, refer to 6.15.1
Through seating screens, page 58.
Operating the lighting functions and horn
Via a utility function screen you are able to operate the
lighting functions with an external input. The utility function
screen is part of one or more profiles and can be activated
like a drive or seating function screen.
1.
Activate utility function screen.
2. Give input to front A to turn on horn.
3. Give short input to right B to turn on/off position lights.
Usage
87