Invacare LiNX REM400 User's Manual Supplement page 8

LiNX® Control System
DANGER!
Risk of Death, Serious Injury, or Damage
Continued use of the wheelchair that is not set
to the correct specifications may cause erratic
behavior of the wheelchair resulting in death,
serious injury, or damage.
– Performance adjustments should only be made
by professionals of the healthcare field or
persons fully conversant with this process and
the driver's capabilities.
– After the wheelchair has been set up/adjusted,
check to make sure that the wheelchair
performs to the specifications entered during
the set up procedure. If the wheelchair
does not perform to specifications, turn the
wheelchair Off immediately and reenter set up
specifications. Contact Invacare, if wheelchair
still does not perform to correct specifications.
WARNING!
Risk of Injury or Damage
Failure to remove the LiNX Access Key (LAK)
from the wheelchair after programming is
complete may lead to unauthorized access to the
wheelchair settings.
– Always remove the LAK from the wheelchair
when programming is complete.
8
WARNING!
Risk of Serious Injury or Damage
Use of unapproved accessories may result in
serious injury or damage.
– Invacare products are specifically designed
and manufactured for use in conjunction with
approved Invacare accessories. Unapproved
accessories have not been tested by Invacare
and are not recommended for use with
Invacare products.
– DO NOT use unapproved accessories.
– To obtain approved Invacare accessories, contact
Invacare by phone or at www.invacare.com.
WARNING!
Risk of Serious Injury or Damage
Loss of power due to loose electrical connections
could cause the wheelchair to suddenly stop
resulting in serious injury or damage.
– ALWAYS ensure that all electrical connections
are tightly connected so they don't vibrate
loose.
60101834-C