Locking/Unlocking The Remote - Invacare LiNX REM400 User's Manual Supplement

• Give forward demand A to sound horn.
• Give short demand to right B to turn on/off position
lights.
• Give short demand to left C to turn on/off hazard
lights.
• Give long demand to left or right D to turn on left or
right direction indicator. A short demand can be used
to turn them off.
Direction indicators turn off automatically after
ten seconds.
Activate a drive function card to drive normally, while
position lights and hazard lights remain turned on.

6.13 Locking/unlocking the remote

The lock feature is not set to ON at the factory, but
can be enabled by your provider. If this parameter
is set to ON, you can lock/unlock the system as
described.
60101834-C
Fig. 6-35
Locking the remote
1.
Press ON/OFF button for more than three seconds, until
a locking overlay is displayed.
2. Remote powers down.
When powering up remote, locking overlay is displayed.
Unlocking the remote
1. Press ON/OFF button.
2.
Tap on locked display until white frame around locking
screen A is filled.
3. Touch display is unlocked and can be used again.
Usage
57