Connectivity Screens; Configuring Connectivity Card - Invacare LiNX REM400 User's Manual Supplement

• Elevating seat lockout
The seating electronics is equipped with a elevating
seat lockout switch to prevent the elevating seat from
rising up above a certain point when the seat tilt or
recline is adjusted above a certain point. The seating
electronics stops automatically, a grey exclamation
point is displayed on the seating screen and extend
is inhibited A.
According to that, an icon with a seat and an
exclamation point is displayed in the status bar. This
indicator remains active until the elevating seat lockout
is deactivated by moving seat tilt or recline up.

6.16 Connectivity screens

Connectivity screens allow you to communicate with external
devices. Connectivity functions supported by your remote
are a mouse mover and a switch control. By default, these
60101834-C
functions are disabled. Contact your provider to activate
Connectivity Screens.
The mouse mover function allows you to control the
cursor on a PC or laptop's screen with a user input on the
wheelchair, such as the joystick on the remote module or
external joysticks. At the moment a four-quadrant operation
is needed to use the mouse mover.
The switch control function is an accessibility feature
that allows you to navigate and select items on your
mobile device (Android and iOS) using the remote's joystick
or touch screen.

6.16.1 Configuring Connectivity Card

Pairing the LiNX system with a user's device
To pair the LiNX system with a user's device (PC, laptop or
mobile device), open the connectivity settings menu.
Usage
67