Invacare LiNX REM400 User's Manual Supplement page 71

If the device paired successfully, a confirmation screen is
displayed on the remote module. Tap on the OK button
to proceed.
If no device is paired within the set timeout period, a
message is displayed "No device was paired". Tap on OK
button to proceed.
LiNX system permits up to ten devices to be paired at
any time. If you have reached this limit and you need
to add more devices, consider forgetting devices,
that have already been paired, see Operating the
Mouse Mover, page 79.
60101834-C
Fig. 6-48
Fig. 6-49
Linking connectivity card with user's device
Connectivity cards must be linked to a paired device. To
link a connectivity card to a device, open the connectivity
settings menu.
1.
Long press navigation button A.
2.
Status display opens. Open Settings menu B.
Fig. 6-50
Fig. 6-51
Usage
71