Live Edit Guidelines - Invacare LiNX REM400 User's Manual Supplement

Control system
Hide thumbs Also See for LiNX REM400:
Table of Contents

Advertisement

LiNX® Control System
WARNING!
Risk of Injury, Damage or Death
Pinched or severed cable(s) may be a shock or fire
hazard and may cause injury, damage or death.
– Ensure all cable(s) are routed and secured
properly.
– Inspect cable(s) periodically for proper routing,
pinching, chafing or other similar wear.
– Replace any damaged cables immediately.
Risk of damage to the mobility device
There are no user-serviceable parts inside any
case.
– Do not open or disassemble any case.
As a manufacturer of wheelchairs, Invacare
endeavors to supply a wide variety of wheelchairs to
meet many needs of the end user. However, final
selection of the type of wheelchair to be used by
an individual rests solely with the user and his/her
healthcare professional capable of making such a
selection. Invacare recommends working with a
qualified rehab technology provider, such as an ATP,
(Assistive Technology Professional).
The information contained in this document is
subject to change without notice.
10

2.1.1 Live Edit Guidelines

WARNING!
Risk of Injury or Damage
Rapid and unfamiliar parameter changes may
lead to injury or damage.
– Qualified technicians should make the user
aware that in live edit mode, the performance
of the wheelchair will be changed instantly.
– After programming in live edit mode, the
wheelchair performance should be checked
for driving safety. Ensure the wheelchair
performance is appropriate to the capabilities
and needs of the user.
– Users should use caution when driving the
wheelchair while operating in Live Edit mode.
– Users should use care to stay in the
programming range.
– Always perform live edit changes in a safe
environment.
Live edit adjustments are best done in an unrestricted
but safe area. The presence of an attendant is
recommended.
The Bluetooth® range of the programmer is 33 ft
(10 m). If the wheelchair drives out of range of
the Bluetooth programmer, the programmer must
reconnect before the parameters can be changed.
60101834-C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents