Using Direct Navigation - Invacare LiNX REM400 User's Manual Supplement

The user must finish his current action to change the
function. Otherwise a function change blocked overlay is
displayed.

6.2.2 Using direct navigation

You navigate profiles and functions by moving from an active
function screen to an adjacent function screen. The function
screen becomes active immediately.
Direct navigation is not performed with an active
user input (e.g. remote), since the active user input
is used to operate the active function screen only
(e.g. moving the remote to drive). Instead, the user
navigates through the profiles and functions using
the touch screen or other control inputs.
Using swipe-and-tap mode
Changing function screens
60101834-C
Fig. 6-18
1.
Swipe over screen or tap navigation button to open
screen preview display.
2.
Swipe left or right to change function screens.
3. Tap on selected function screen, tap navigation button
or wait for a few seconds to activate selected function
screen.
Changing profiles
1.
Profile 1
Profile 2
Profile 3
Usage
33