6
Remove the seven screws (B) securing the controller board.
Installation note: After installing a new controller board, perform the printer configuration restoration. See
"Restoring the printer configuration after replacing the controller board" on page
Toner cartridge smart chip contact removal
1
Remove the right cover. See
Note: For MS610de, also remove the following:
a
Controller board shield. See
b
Controller board. See
2
Disconnect the cable JARW1 from the system board.
"Right cover removal" on page
"Controller board shield removal (MS610de)" on page
"Controller board removals" on page
Parts removal
251
B
241.
247.
4514-6xx
205.
247.