Cartridge gearbox removal
1
Remove the left cover. See
2
Remove the four screws (A) securing the cartridge gearbox.
3
Disconnect the cable from the cartridge gearbox.
Duplex gear assembly removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
302.
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Position the printer so that it sits on its right side.
7
Remove the E‑clip (A).
8
Remove the screw (B).
9
Remove the screw (C).
"Left cover removal" on page
"Left cover removal" on page
"Rear exit door removal" on page 301
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
Repair information
209.
A
209.
and
272.
274.
224
"Rear cover removal" on page
273.
7015