Automatically Display Error Screens; Usb Pnp; Restore Factory Defaults - Lexmark MS517dn Service Manual

Available options:
•
Auto
•
Full—Forces the USB port to run at full speed and also disables its high‑speed capabilities.

Automatically Display Error Screens

If On, the panel automatically displays any existing printer-related IR after the printer remains inactive on the
home screen for a length of time equal to the Screen timeout setting in the Timeouts section of the General
settings menu. Any IR that appears on the display will give the user the option of returning to the home screen
without clearing it. From the home screen, any other workflow or feature can be initiated as usual. Once the
printer returns to the home screen, any existing IR will again appear after the printer remains inactive for a
length of time equal to the Screen timeout setting.
To change this setting:
1
From the Configuration menu, navigate to Automatically Display Error Screens.
2
Select from the available options:
•
On (default)
•
Off
3
Depending on the printer model, press OK or touch
Configuration menu without saving any changes.

USB PnP

In some cases, the USB port at the back of the printer may be incompatible with the chipset in a user's PC. This
setting lets the user change the USB driver mode to improve its compatibility with these PCs.
Available options:
•
1
•
2

Restore Factory Defaults

Restore Settings
This setting enables a user to restore all of the printer settings to either the network settings (on network models
only) or to the base printer settings.
To restore the settings:
1
From the Configuration menu, navigate to Restore Factory Defaults > Restore Settings.
2
Select from the available options:
•
Restore Printer Settings—restores all non‑critical base printer NVRAM settings.
•
Restore Network Settings—restores all network NVRAM settings.
•
Restore Apps—restores the factory default eSF configuration.
to save the setting, or press X to return to the
Service menus
198
4514-6xx