Paper Prompts
This controls which tray a change prompt is directed to when paper is sensed to be the wrong size.
Note: The value of
"Action for Prompts" on page 194
To change this setting:
1
From the Configuration menu, navigate to Paper Prompts.
2
Select from the available options:
•
Auto (default)
•
Multi‑purpose Feeder
•
Manual Paper
3
Depending on the printer model, press OK or touch
Configuration menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input sources
will receive the change prompt. When set to a value other than Auto, the selected source always receives this
type of prompt.
Envelope Prompts
This controls which tray a change prompt is directed to when the envelopes are sensed to be the wrong size.
Note: The value of
"Action for Prompts" on page 194
To change this setting:
1
From the Configuration menu, navigate to Envelope Prompts.
2
Select from the available options:
•
Auto (default)
•
Multi‑purpose Feeder
•
Manual Envelope
3
Depending on the printer model, press OK or touch
Configuration menu without saving any changes.
When it is set to Auto, the emulator selected to print the job determines which of the installed input sources
will receive the change prompt. When set to a value other than Auto, the selected source always receives this
type of prompt.
may override the value of this setting.
to save the setting, or press X to return to the
may override the value of this setting.
to save the setting, or press X to return to the
Service menus
193
4514-6xx