Lexmark MS517dn Service Manual page 187

Fuser Temperature (Fuser Temp)
This setting adjusts the fuser temperature to solve problems with paper curl on low‑grade paper and/or melting
of letterheads on some papers.
To adjust this setting:
1
From the Diagnostics menu, navigate to:
EP Setup > Fuser Temp
2
Press OK or touch
Transfer Adjust
This setting controls the transfer roll algorithm.
To adjust this setting:
1
From the Diagnostics menu, navigate to:
EP Setup > Transfer Adjust
2
Press OK or touch
Print Contrast
This setting controls the developer voltage offset.
To adjust this setting:
1
From the Diagnostics menu, navigate to:
EP Setup > Print Contrast
2
Press OK or touch
Charge Roll
This setting controls the charge roll voltage.
To adjust this setting:
1
From the Diagnostics menu, navigate to:
EP Setup > Charge Roll
2
Press OK or touch
to save any changes.
to save any changes.
to save any changes.
to save any changes.
Service menus
187
4514-6xx