The Navigation Buttons access menu items and parameters, where the highlighted
•
item on the display is selectable (by pressing Enter) or selected (e.g., a default
setting).
Press and hold the Menu Button to adjust the display contrast then release the
button when the desired appearance has been achieved.
4.2 The Menu System
The menu system is composed of seven branches:
MEDIA SETTINGS
•
PRINT CONTROL
•
PRINTER OPTIONS
•
SYSTEM SETTINGS
•
COMMUNICATIONS
•
DIAGNOSTICS
•
MCL OPTIONS
•
Entering the menu system takes the printer off-line and halts the processing of
•
new data.
Prompts may appear before menu access is granted and changes enacted; see
•
Section 5.1.1.
The MENU MODE setting controls menu level access; see, Section 4.2.4.
•
Host computer commands may, in some cases, override menu settings; see
•
Section 4.2.5.
Depending upon the firmware and options, some of the menu selections
•
represented below may not appear in your printer and may indicate NOT
INSTALLED when accessed.
Throughout this text "displayed message" refers to the Printer Status Line or
•
the Main Display Area of the Control Panel (see Section 4.1).
H-Class
33