Datamax H-4212X Operator's Manual page 46

Media Settings (continued)
Menu Item
RIBBON LOW OPTIONS
RIBBON LOW DIAMETER
1.38 (1.00 – 2.00 in.)
PAUSE ON RIBBON LOW
ENABLED
DISABLED
SENSOR CALIBRATION ♦
PERFORM CALIBRATION
YES
NO
ADVANCED ENTRY
PAPER SENSOR LEVEL
170 (0 – 255)
REFL PAPER LEVEL
020 (0 – 255)
GAP SENSOR LEVEL
016 (0 – 255)
MARK SENSOR LEVEL
230 (0 – 255)
EMPTY SENSOR LEVEL
009 (0 – 255)
TRAN SENSOR GAIN
31 (0 – 31)
REFL SENSOR GAIN
13 (0 – 31)
36
Defines the response when THERMAL TRANSFER is
selected and the ribbon supply diminishes, where:
Sets the threshold that will trigger a Low Ribbon
Warning prompt, where:
Is the outer diameter size of the ribbon roll.
Sets the printer to pause when the Ribbon Low
Diameter setting is met, where:
Forces the user to press the PAUSE Key to proceed
with the print job.
Allows printing to continue until ribbon empty is
declared.
Selects the method that is used to calibrate the media
sensor (see Section 5.2), where:
Allows automatic calibration, where:
Establishes the best values based on sampled
readings.
Exits the menu item without changing the current
settings.
Sets the values via manual entry process, where:
Establishes the threshold value for standard paper.
Establishes the threshold value for reflective paper.
Establishes the threshold value for the gap/notch.
Establishes the threshold value for the reflective mark.
Establishes the threshold value for the empty
condition.
Establishes the sensitivity of the gap/notch sensor.
Establishes the sensitivity of the reflective sensor.
Details
H-Class