Datamax H-4212X Operator's Manual page 47

Media Settings (continued)
Menu Item
PRINTHEAD CLEANING
CLEAN HEAD SCHEDULE
000 0 – 200 in. (* 1000)
CLEAN HEAD COUNTER
RESET COUNTER
YES
NO
CLEAN HEAD NOW
YES
NO
H-Class
Controls printhead cleaning alerts and functions,
where:
Specifies the inch (or centimeter) count (multiplied by
one thousand) at which to clean the printhead. If this
count is exceeded three times, a Head Cleaning Fault
will occur.
Zero (000) disables this function.
Indicates the number of inches (or centimeters) since
a cleaning was last initiated.
Allows the Clean Head Schedule to restart the count,
where:
Resets the CLEAN HEAD COUNTER.
Exits the menu item without changing the current
setting.
Allows cleaning to begin, where:
Initiates the cleaning process and resets the Clean
Head Counter (see Section 5.6.6).
Exits the menu item without cleaning.
Details
37