Attaching Shoulder Strap System - Datamax APEX 4 User Manual

1.4 Attaching Shoulder Strap System

The Shoulder Strap System consists of two parts:

A knob located on the back part of the printer just above the battery door

A strap with click on connector
To attach the strap to the knob:

Press on the two latches on the sides of the connector of the Shoulder Strap

Slide the knob located on the back of the printer into the connector slot.

Release the two latches on the connector. The printer is now secure.

To release the printer, press in on the two latches on the connector and pull the knob clear of
the slot.
Note: Do not force or pull the printer from the connector without pressing in on the two latches
CONNECTION
FIGURE 5: KNOB CONNECTION AND QUICK CLIP
SHOULDER
7