Datamax H-4212X Operator's Manual page 125

Displayed Message
TOP OF FORM FAULT
H-Class
Fault Messages (continued)
Description
The printer could not find
a TOF mark within the
maximum length setting,
or TOF was encountered
in an unexpected place.
When the SENSOR
TYPE is REFLECTIVE,
this indication is
given for Out Of
Stock.
Possible Solution(s)
Check the following
possibilities:
Calibration may be
•
necessary (see Section
3.4);
The Media Sensor may need
•
adjustment (see Section
3.2);
The Media Guide may need
•
adjustment (see Section
3.1);
The Leveling Cam may need
•
adjustment (see Section
5.4.1);
The MAXIMUM LABEL
•
LENGTH may need to be
increased (see Section
4.2.1); or
The Media Sensor may need
•
to be cleaned (see Section
5.6.4).
115