Datamax H-4212X Operator's Manual page 114

Displayed Message
INVALID IMAGE
SUCCESSFUL
SYSTEM FAULT
WRITING FLASH
WRITING FLASH
FAILED
Downloaded Font Removal
When deleting a plug-in, all files contained within that directory will be deleted as well; see
MODULES / DELETE FILE, Section 4.2.3.
104
Font Download Messages (continued)
Descriptions / Possible Causes / Solutions
The download content was corrupted or a transmission error
occurred. Check for corruption by printing a configuration label
or by looking at the system window; a double question mark
before the plug-in part number indicates corruption. Try the
download again; however, if the problem continues call for
service.
The file was successfully installed; the printer will perform an
automatic reset.
Insufficient memory space for the file exists in the destination
module. Try selecting a different destination module or clear
some space on the module and perform the download again.
The file was successfully decrypted, verified, and is now being
written into the destination module.
The file failed checksum verification after being written to the
module. Try the download again; however, if the problem
continues call for service.
H-Class