Datamax H-4212X Operator's Manual page 73

Communications (continued)
Menu Item
IP DISCOVERY
ENABLED
DISABLED
SNMP
ENABLED
DISABLED
NETWORK REPORT
SET FACTORY DEFAULTS
YES
NO
H-Class
Controls IP Address discovery, where:
Broadcasts over the network to receive addresses
from the responsible server at startup. Manual
modifications to IP Address, Subnet Mask, or Gateway
are not allowed; and, if no server is found, the
specified static value will be used.
A server assigned IP address takes
precedence over any static address stored in
the interface.
Uses the stored static IP, Subnet Mask, and / or
Gateway Address.
Allows management protocols, where:
Sends messages to SNMP-compliant devices.
Sends no messages.
Allows a network status report to be viewed or
printed, with content similar to the example below:
NETWORK REPORT
PRINTER STATUS
MACO: NOT SET
IP ADDRESS: 192.168.10.26
SUBNET MASK: 255.255.255.0
GATEWAY: 192.168.10.26
DCHP: *DISABLED
SNMP: *ENABLED
WLAN MODULE
MODULE FW VERSION: 4.3.0.24
RADIO FW VERSION: 1.1.1.111.8.4.0.145
PORT STATUS: CONNECTED: ADHOC
SSID: 0090c901d064
MACR: 00:90:C9:01:D0:64
BSS ADDRESS: 192.168.10.1
SUBNET ADDRESS: 255.255.255.0
GATEWAY: 192.168.10.1
DHCP: *DISABLED
Returns the factory-programmed values, where:
Restores the default settings.
The reset will be automatic; all settings will be
restored except CUSTOM ADJUSTMENTS and
calibrations.
Exits the menu item without changing the current
settings.
Details
63