Load Cards; Load Ribbon - DataCard SD260 Installation And User Manual

Load Cards

If you are using a manual feed printer, keep a supply of blank cards close to the
printer.
For printers with an input hopper, continue with these steps:
1.
Open the input hopper (a).
2.
Fan cards before placing
them into input hopper (b).
3.
Insert magnetic stripe cards
with the stripe down and
toward the right-hand side
of the input hopper.
4.
Close input hopper (c).

Load Ribbon

Load the ribbon when you install the printer
and when the ribbon runs out.
1.
Open the printer's top cover.
2.
Remove the print ribbon cartridge.
168 How-To Topics