Run A Cleaning Card - DataCard SD260 Installation And User Manual

Run a Cleaning Card

Run a printer cleaning card to clean debris from the inside of
the printer. The cleaning card can remove most contaminants
from the printer.
1.
Begin with the printer powered on.
2.
Open the printer cover and remove the print ribbon
cartridge.
3.
Close the cover. The Ribbon Light will blink rapidly.
4.
Open the input hopper and remove unprinted cards. The
Card light will blink rapidly if the printer has the Card
Present option.
5.
Begin with the printer "Ready". The U
steady green.
6.
Press the U
of the LCD panel.
7.
Press the E
8.
Press the E
9.
Press the E
10.
With Cleaning Card displayed on Line 2, press the E
key to display Start on Line 2.
11.
Press the E
the LCD panel. The U
12. Open the cleaning card package. 

Place the cleaning card in the input area and press the
U
SER
The printer moves the card through the printer several
times and ejects it in the output stacker.
13.
Remove the used cleaning card. Wait a few minutes for
the rollers to dry.
14.
Replace the cards in the input hopper.
15.
Replace the cleaning sleeve with a new sleeve, and
remove the protective cover.
button to display "Suspended" on Line 1
SER
key to enter the menu system.
NTER
key to enter the Maintenance menu.
NTER
key to choose Cleaning Card.
NTER
key to display "Insert Cleaning Card" in
NTER
button and the Card light blink.
SER
button to start the cleaning cycle.
button shows
SER
NTER
161