Change A Card Design - DataCard SD260 Installation And User Manual

10.
Press the E
11.
Press the E
12.
Press the E
13.
Press the E
14.
Press the E
15.
Press the E
16.
Press the E
17.
Press the E
18.
To print cards, press the E
Menu Available" display.
19.
Press the U

Change a Card Design

Card design is the name given to the combined features of the printed cards. See
"Card Design and Setup"
An organization can change:
• The arrangement of card components, such as moving a photo from the center
to the left side of the card
• The source for card components, such as using a different camera for taking
photos, or using a new file for a logo.
• The components on the card, such as adding magnetic stripe, logo, or bar
code.
Whenever the card design changes, review the settings used for the card. Use this
checklist to guide your changes. Always:
• Use high quality (300dpi) photos and graphics.
• Print several samples of the updated card design.
key to view the cycle count.
NTER
key to display "Completed Card" on Line 2.
NTER
key to view the Completed Cards count.
NTER
key to display "Rejected Cards" on Line 2.
NTER
key to display the Rejected Cards count.
NTER
key to display to display "Lost Cards" on Line 2.
NTER
key to display the Lost Cards count.
NTER
key to display "Exit" on Line 2.
NTER
key repeatedly to return to the "Suspended /
NTER
button to display "Ready" on the LCD panel.
SER
for more information.
159