DataCard SD260 Installation And User Manual page 64

• If the printer is not discovered automatically, select "The printer that I want
• In the address bar, type the name of the Host PC and the shared printer
7.
Install the following support files from the driver CD, if needed:
• Install magnetic stripe fonts if the client PCs will be processing magnetic
• Copy the printer documentation folder to each client PC.
• Install the ID Works XPS Card Printer Plug-in, if necessary.
8.
Configure the Client PC:
Settings on the client PC, such as ribbon type and print resolution, must be
configured to match the settings of the host PC. The client PC will not
automatically detect the type of ribbon installed in the printer; instead it will
default to YMCKT ribbon and 300 x 300 dpi resolution. Follow these steps to
change the default settings:
A.
B.
54
wasn't listed" entry.
name following this format: \\host PC name\shared printer name.
stripe cards.
Set Ribbon Type:
a.
Open Printing Preferences for the shared printer.
b.
Click the Layout tab and then click the Advanced... button.
c.
Select the type of ribbon from the Ribbon Type drop-down list.
d.
Click the Apply button.
e.
Close Printing Preferences.
Set Print Resolution:
a.
Open Printing Properties for the shared printer.
b.
Click the Print Mode tab.
c.
Select the resolution from the Color and Monochrome lists.
d.
Click the Apply button and then close Printing Properties.
e.
For more information about print resolution, see
Resolution".
"Set the Print
Install the Printer