DataCard SD260 Installation And User Manual page 99

7.
Press the E
NTER
8.
Press the E
NTER
9.
Press the E
NTER
10.
With Cleaning Card displayed on Line 2, press the E
on Line 2.
11.
Press the E
NTER
U button and the Card light blink.
SER
12.
Open the cleaning card package. Place the cleaning card in
the input area and press the U
cycle. 



The printer moves the card through the printer several times
and ejects it in the output stacker.
13.
Remove the used cleaning card. Wait a few minutes for the rollers to dry.
14.
Replace the cards in the input hopper.
15.
Replace the cleaning sleeve with a new sleeve, and remove the protective
cover. See "Load Cleaning Roller"
16.
Replace the ribbon cartridge and close the printer. The printer is ready to
print cards again.
17.
Discard the used cleaning card and cleaning sleeve.
HINTS & TIPS
• Use the cleaning card and cleaning sleeve one time only.
key to enter the menu system.
key to enter the Maintenance menu.
key to choose Cleaning Card.
key to display "Insert Cleaning Card" in the LCD panel. The
button to start the cleaning
SER
for the steps to follow.
key to display Start
NTER
89