Card Design: Magnetic Stripe; About Magnetic Stripe - DataCard SD260 Installation And User Manual

Card Design: Magnetic Stripe

This section covers the following topics:
•

"About Magnetic Stripe"

•
"Magnetic Stripe Formats"
•
"Use Magnetic Stripe Escapes"
•
"Use Magnetic Stripe Fonts"
About Magnetic Stripe
Magnetic stripe is an option available in the printer. See
the Printer Status page of Printer Properties for the
printer to see if your printer has a magnetic stripe
option. The cards you use must also have a magnetic
stripe. The magnetic stripe is a brown or black stripe
close to one long edge of the card.
See the package containing new cards for details about
the magnetic stripe.
The magnetic stripe option is set up to define the
coercivity, number of tracks, and data format. The
coercivity and data format are set in the printer. The installer sets these values
and they remain the same for all cards printed using the same design. See
Magnetic Stripe Coercivity"
The data format determines how many characters can be encoded on a track. It
also determines which characters can be encoded. See
see the characters available with the default ISO three-track format.
See "Single-Track
track format.
Your cards can use the default format for each track, or can use a different
combination of tracks and data formats.
102
if you need to change the coercivity.
Option"to see the characters available with the JIS single-
"Set
"Three-Track Option"to
Card Design and Setup